Super Yacht Support 780

Super Yacht Support 780

Two custom super yacht support tenders built for clients in Sint Maarten, N.A and St Barts. With an open deck layout, single Ullman shock mitigating helm seat and offset console give this boat ample room for provisions, tools, sails and equipment. Powered by a single 300hp Yamaha the boats easily cruise at 35-40mph.

request a quote
Length Overall 25’ 6”
Length of GRP hull 22’ 5”
Beam overall 9’ 6”
Internal beam - Maximum 5’ 8”
Dead Rise at Transom 24°
Transom angle 13°
Recommended C to C of engines 28.6”
Height of transom 27.6”
Capacity of standard fuel tanks per each 79 Gal
Estimated Draft (Motors up / Motors Down) 1’ 6” / 2’ 6”
Diameter of tube, average, approximate 22.8”
Weight lightship – Estimate. (Hull, Deck, Tube, and Dry Fuel Tanks only) 2623 lbs
Max HP 269 Hp
Recommended 2 x 150 Hp
Max carry capacity 2220 lbs
Number of tube compartments 7
Max number of Persons 12
  • Hypalon tubes (1100Dtex)
  • 2 x Heavy duty shark fin rubbing strakes
  • Full length grab line
  • 5 x Inflation Valves
  • 5 x Over pressure release valves
  • Internally taped seams
  • 2 x Paddles
  • 2 x Stainless steel bow eyes
  • Anchor rope bow protection
  • Anchor locker
  • Aluminium keel protection
  • 3 x Transom knees
  • Engine motor well
  • Under deck cable track
  • 2 x Below deck fuel lockers
  • 2 x Towing points
  • Self-draining deck
  • Non-slip deck
  • 1 x Double action pump
  • 1 x Repair kit

Technical Specs

Length Overall 25’ 6”
Length of GRP hull 22’ 5”
Beam overall 9’ 6”
Internal beam - Maximum 5’ 8”
Dead Rise at Transom 24°
Transom angle 13°
Recommended C to C of engines 28.6”
Height of transom 27.6”
Capacity of standard fuel tanks per each 79 Gal
Estimated Draft (Motors up / Motors Down) 1’ 6” / 2’ 6”
Diameter of tube, average, approximate 22.8”
Weight lightship – Estimate. (Hull, Deck, Tube, and Dry Fuel Tanks only) 2623 lbs
Max HP 269 Hp
Recommended 2 x 150 Hp
Max carry capacity 2220 lbs
Number of tube compartments 7
Max number of Persons 12

Standard Features

  • Hypalon tubes (1100Dtex)
  • 2 x Heavy duty shark fin rubbing strakes
  • Full length grab line
  • 5 x Inflation Valves
  • 5 x Over pressure release valves
  • Internally taped seams
  • 2 x Paddles
  • 2 x Stainless steel bow eyes
  • Anchor rope bow protection
  • Anchor locker
  • Aluminium keel protection
  • 3 x Transom knees
  • Engine motor well
  • Under deck cable track
  • 2 x Below deck fuel lockers
  • 2 x Towing points
  • Self-draining deck
  • Non-slip deck
  • 1 x Double action pump
  • 1 x Repair kit

Downloads

We have a solution for all of your military/utility boating needs

Request a quote